Flopro Professional Metal Reel

SHOP CATEGORIES > ALL FOR GARDEN > WATERING SYSTEM

Flopro Professional Metal Reel

  • Flopro Professional Metal Reel

  • Flopro Professional Metal Reel | Watering and irrigation system for your garden | Shop full range of garden hoses, fittings, sprinklers and more | Nationwide delivery
  • €99.99
Out of stock.

This stylish and contemporary Flopro Heavy Duty Metal Hose Reel has been designed to ensure that your hose does not kink or twist when winding. The reel comes empty so you can add whatever length of hose you want. It can hold up to 40m of hose and is either freestanding or it can be wall mounted (brackets included).

  • Freestanding or wall mounted
  • Holds up to 40m of 13mm (1/2″) hose (not included)
  • High quality stainless steel and aluminium construction
  • Durable and hard-wearing
  • Resistant to rust
  • Wall mounting brackets and fittings included
  • Metal hose connectors for improved durability
  • 100% compatibility with all watering brands

How to Use

This Flopro Metal Hose Reel can be used wall mounted or freestanding

To get started

  • Remove handle and all attachments from inside the drum
  • Using the Allen key and screw provided, attach the handle to the outside of the drum and tighten
  • Screw the female tap adaptor onto the outside of the drum
  • Attach a hose connector to the hose pipe you would like to wind onto the reel
  • Click the hose connector onto the male outlet inside the reel – make sure this outlet is fully tightened
  • Wind on the hose
  • Add a water stop hose connector and either a Nozzle or Spray gun to the end of your hose pipe
  • Attach a leader hose from your reel to your tap
  • Place on the ground to begin use

Attaching the reel to the wall
Please ensure the reel is positioned close to the tap, to a maximum suggested distance of 1 metre.

You will require
Drill, screwdriver and spirit level

  • Using the bracket as a template and the spirit level to ensure the bracket is straight, mark the wall through the bracket. For best results, the brackets need to be positioned at either end of the top pole
  • Drill the wall in the two identified positions
  • Insert the wall plugs provided
  • Place the brackets onto the wall and fix in place using the screws provided
  • Using the Allen key provided, loosen & remove the screws at either side of the top frame and remove the pole. Pull the 2 x black grips onto the pole and position at either end. These grips will help to protect the pole and provide grip for the wall bracket
  • Insert the pole back onto the reel frame and tighten the screws
  • Place the reel onto the wall, positioning the rubber grips on the pole into the brackets
  • Insert the bracket handle screws and tighten
  • Wind on the hose

Customers Also Bought