Kent&Stowe Tele Geared Anvil Lopper

Kent & Stowe Telescopic Geared Anvil Loppers are used for powerful pruning of hard dead wood. These loppers include a premium ground carbon steel blade with non-stick PTFE coating for rust resistance and a smoother cut.

Anvil action loppers have one blade that closes onto a cutting block.  An anvil cut is more powerful than bypass with minimal effort required. The geared mechanism on these loppers increases the cutting power therefore gives maximum leverage with minimal effort. You might also be interested in these Bypass Loppers.

• Aluminium lightweight handles with comfort grip
• Large shock absorbing cushion buffers
• Easy to use telescopic handles with 5 locking positions; adjustable from 630mm to 830mm
• To keep these blades in good condition wipe with an oiled cloth after each use and sharpen when necessary
• Cutting diameter: 45mm
• 5 year guarantee

How to Use:

• Use for extra reach while pruning
• Ideal for powerful pruning of hard, mature and dead wood

How to maintain and care for your Garden Tools

It is very important to take proper care of your garden tool so that it continues to perform at its peak. Do not leave your tool outside, always store it away after use in a dry environment. Even in dry weather conditions your tools, if left outside, are exposed to moisture from wet grass and dew.

Cleaning and drying your garden tools will keep them in good working order. Always remove all of the soil from your digging tools after each use by washing the dirt off.

Never put your tools away wet. Allow them to dry completely before storing to prevent rusting and handle rot. For all wood handled tools apply a light coating of boiled linseed oil to help prevent the wood from drying out and cracking. If a wooden handle is very dirty, remove as much of the soil as possible with a stiff brush. If you need to use water, gently wet the handle with a damp cloth, making sure that you don’t soak the wood, as this may cause the grain to lift and the handle to swell.

Thoroughly clean any tools which have been used for chemical applications. Fertilisers and other chemicals will rapidly corrode any metal.